TSL-40-160

Single-stage Centrifugal Motor Pump - Monoblock with semi-open Impeller - Single-phase or three-phase motor in II Poles, 60Hz, 3500rpm - Flange nozzles according to ANSI B16.1 standard (with flange against BSP thread), Suction 2.1 / 2" "x Pressure 1.1 / 2 "". Used for water with non-fibrous solids with a maximum diameter of 18mm and a proportion of up to 20% of the volume. Maximum Flow: 80.1m³ / h - Minimum Flow: 6.0m³ / h; Maximum Pressure: 65.9mca - Minimum Pressure: 20.0mca

Brand
Thebe
Applications
Agriculture / Irrigation
Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.
Non fiber solids water
Pumping of wastewater with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Slurry
Pumping of liquid to reservoir or irrigation with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Construction
Use in construction / building in general.
Sewer
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications


• Suction Casing / Suction cover and GG-20 cast iron Casing.
• Intermediate / GG-20 cast iron support.
• Thermoplastic Impellers.
• Stages in cast iron in GG-20.
• O-ring seals in Buna N.
• Mechanical seal: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.


  • Technical Information
  • Options
  • Documentation
  • Drawings
  • Minimum Pressure 20,0 mca
  • Minimum Flow 6,0 m³/h
  • Maximum Flow 80,1 m³/h
  • Maximum Pressure 65,9 mca


  • • Whole Nodular Iron Pump (GGG-40).
    • Whole Pump in Stainless Steel AISI 304 or AISI 316.
    • Whole Pump in Bronze.
    • Whole pump in WCB (Carbon Steel).
    • Nodular Iron impeller (GGG-40).
    • Stainless impeller (AISI 304 / AISI 316).

    • Bronze Rotor.
    • WCB Rotor (Carbon Steel).
    • Special seal of the Mechanical Seal / O'ring Ring through elastomers (rubbers) in Viton or EPDM and "" faces "" in Silicon or Tungsten Carbide.
    • Assembly with explosion-proof motor.