AE-2
Self-priming Single-stage Centrifugal Motor Pump - Monobloc or Bare Shaft with semi-open Impeller - Single-phase or three-phase II Poles motor, 60Hz, 3500rpm - Nozzles with BSP thread Suction 2" "x Pressure 2" ". Used for water with non-fibrous solids with a maximum diameter of 5mm and a proportion of up to 20% of the volume. Maximum Flow: 30.0m³ / h - Minimum Flow: 0.4m³ / h; Maximum Pressure: 23.0mca - Minimum Pressure: 5.0mca.
Brand
Thebe
Applications
Combustion Motor Coupling
Coupling availability on petrol / diesel engines in monoblock version.
Agriculture / Irrigation
Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.
Non fiber solids water
Pumping of wastewater with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Slurry
Pumping of liquid to reservoir or irrigation with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Construction
Use in construction / building in general.
Sewer
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Housing
Supply of reservoirs / water tanks, cisterns, pressurization of gardens.
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications

• GG-20 cast iron Casing.
• GG-20 cast iron Impeller.
• GG-20 cast iron intermediate.
• GG-20 cast iron valve washer.
• Buna N valve gasket.
• O-ring for sealing the Buna N Casing.
• Mechanical seal: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.
  • Technical Information
  • Options
  • Documentation
  • Maximum Pressure 23,0 mca
  • Maximum Flow 30,0 m³/h
  • Minimum Flow 0,4 m³/h
  • Minimum Pressure 5,0 mca

  • • Whole Nodular Iron Pump (GGG-40).
    • Whole Pump in Stainless Steel AISI 304 or AISI 316.
    • Whole Pump in Bronze.
    • Whole pump in WCB (Carbon Steel).
    • Nodular Iron impeller (GGG-40).
    • Stainless impeller (AISI 304 / AISI 316).

    • Bronze Rotor.
    • WCB Rotor (Carbon Steel).
    • Special sealing of the Mechanical Seal / O'ring Ring / valve joint through elastomers (rubbers) in Viton or EPDM and "" faces "" in Silicon Carbide or Tungsten.
    • Gasket sealing.
    • NPT standard threaded nozzles.
    • Direct mounting on 3600rpm combustion engines (diesel / gasoline).
    • Mounting with explosion-proof motor.
    • Mounting bearing x Base x Elastic sleeve.

    "