DVS


• Discharge connection: 50 ~ 80 mm
• Motor power: 1 ~ 5 hp
• Impeller: Semivortex
• Shaft seal: Double mechanical seal, oil lubricated
• Type: Submersible, dry chamber
• Protection index: IP-68
• Insulation class: F
• Rated speed: 3,500 rpm (2 poles)
• Stator voltage: 220 / 380-440V (three-phase) others on request
• Start type: Direct
• Number of phases: three-phase (1 ~ 5 hp)
• Internal protection: Overcurrent protector
• Service factor: 1.15
• Electric cable: Length 6 m (1 ~ 2 hp) Length 10 m (3 and 5 hp)
• Maximum temperature: 40 ºC
• Maximum submergence: 4 m ( 1 ~ 2 hp) 8 m (3 and 5 hp)
• Number of starts per hour: 10.
• Flow rate: 2 ~ 59 m³ / h
• Manometric height: 4 ~ 26 mca

Brand
Ebara
Applications
Drainage of Wastewater and Rainwater
Depletion of reservoirs, wells, basements, floods.
Fertigation
Pressurization for irrigation of products free of suspended solids, however, with the presence of nutrients / pesticides / urea (check material compatibility).
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications


• Volute: Cast Iron.
• Impeller: Cast Iron.
• Shaft: AISI 403 stainless steel.
• motor Casing: Cast iron.
• Nuts and bolts: AISI 304 stainless steel.
• Mechanical seals: Upper: ceramic x graphite - Lower: silicon carbide x silicon carbide.
• Bare Shafts: Pre-lubricated armored ball Bare Shafts.


  • Technical Information
  • Documentation
  • Minimum Pressure 4,0 mca
  • Minimum Flow 3,0 m³/h
  • Maximum Flow 59,0 m³/h
  • Maximum Pressure 26,0 mca