Submersible Centrifugal Pump - Vortex type semi-open impeller - Automatic float incorporated in single-phase version up to 1.5hp - IP-68 motor in II Poles, 60Hz, 3500rpm - Nozzle with BSP 1.1 / 2 thread" Used for water with solids with a maximum diameter of 50mm and a proportion of up to 20% of the volume. Maximum Flow: 48.0m³ / h - Minimum Flow: 6.0m³ / h; Maximum pressure: 16.1mca - Minimum pressure: 1.5mca. NOTE: Free of oil in the motor (dry chamber), the cooling is performed by the water by which it is submerged. Maximum submergence of 10.0m.

Pumping of liquid to reservoir or irrigation with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Use in construction / building in general.
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).

• 304 stainless steel Casing.
• Suction support in 304 stainless steel.
• Impeller in 304 stainless steel.
• Sealing ring in Buna N.
• Double mechanical seal lubricated a oil.
• Upper: Graphite and ceramic faces. Spring in 304 stainless steel and elastomer (rubber) in Buna N.
• Bottom: Silicon carbide faces. Spring in 304 stainless steel and elastomer (rubber) in Buna N.

  • Technical Information
  • Documentation
  • Maximum Pressure 16,1 mca
  • Maximum Flow 48,0 m³/h
  • Minimum Flow 6,0 m³/h
  • Minimum Pressure 1,5 mca