Multi-stage Centrifugal Pump - Tractorized with gearbox, cardan and base - Designed for tractor power take-off - It has two half-open Impellers in the back-to-back configuration for high pressures - Rotation II Poles, 60Hz, 3500rpm - Flange nozzles according to ANSI standard B16.1 (with flange for BSP thread), Suction 2.1 / 2 "" x Pressure 1.1 / 2 "". Used for water with non-fibrous solids with a maximum diameter of 18mm and a proportion of up to 20% of the volume. Maximum Flow: 92.4m³ / h - Minimum Flow: 4.9m³ / h; Maximum Pressure: 126.3mca - Minimum Pressure: 40.0mca.

Cardain Coupling
Tractor version: comes with cardan, gearbox and base. Product designed for installation on the tractor PTO
Agriculture / Irrigation
Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.

• GG-25 cast iron discharge Casing.
• GG-25 cast iron suction Casing.
• GG-25 cast iron separator plate.
• GG cast iron Impellers -25.
• Loose flange in cast iron GG-25.
• Intermediate in cast iron GG-20.
• Sealing O'ring rings in Buna N.
• Mechanical seal: Graphite and ceramic faces. Spring in 304 stainless steel and elastomer (rubber) in Buna N.

  • Technical Information
  • Options
  • Documentation
  • Drawings
  • Maximum Pressure 126,3 mca
  • Maximum Flow 92,4 m³/h
  • Minimum Flow 4,9 m³/h
  • Minimum Pressure 40,0 mca

  • • Whole pumping station in Nodular Iron (GGG-40).
    • Whole pumping station in AISI 304 or AISI 316 stainless steel.
    • Whole pumping station in Bronze.
    • Whole pump in WCB (Carbon Steel).
    • Rotors in Nodular Iron (GGG-40).
    • Rotors in Stainless Steel AISI 304 or AISI 316.
    • Rotors in Bronze.
    • Rotors in WCB (Carbon Steel).
    • Special seal of the Mechanical Seal / O'ring Ring through elastomers (rubbers) in Viton or EPDM and "faces" in Silicon Carbide or Tungsten.