TSB-2 (250)

Submersible Centrifugal Pump - Semi-open impeller - Dielectric motor cooled in IV poles, 60Hz, 1750rpm - Nozzle with BSP 3 thread" ". Used for sewage with non-fibrous solids with a maximum diameter of 50mm and a proportion of up to 20% of the volume. Maximum Flow: 70.3m³ / h - Minimum Flow: 4.0m³ / h; Maximum Pressure: 11.5mca - Minimum Pressure: 2.0mca. NOTE: Do not use in drinking water due to dielectric oil.

Brand
Thebe
Applications
Slurry
Pumping of liquid to reservoir or irrigation with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Construction
Use in construction / building in general.
Sewer
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications


• GG-20 cast iron Casing and grid.
• GG-20 cast iron Impeller.
• Buna N sealing rings.
• Mechanical seal: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.
• Retainer between pump and motor for better sealing.


  • Technical Information
  • Options
  • Documentation
  • Minimum Pressure 2,0 mca
  • Maximum Pressure 28,0 mca
  • Maximum Flow 70,3 m³/h
  • Minimum Flow 4,0 m³/h


  • • NPT standard threaded nozzles.
    • Entire pump in bronze.
    • Stainless steel impeller (AISI 304 / AISI 316).