RL-26

Single-stage Centrifugal Motor Pump - Monobloc or Bare Shaft with semi-open Impeller- Three-phase II Poles Motor, 60Hz, 3500rpm - Flange Nozzles according to ANSI B16.1 standard (accompanies against BSP thread flange), Suction 3" "x Pressure 2.1 / 2" " . Used for water with non-fibrous solids with a maximum diameter of 8mm and a proportion of up to 20% of the volume. Maximum Flow: 106.0m³ / h - Minimum Flow: 15.0m³ / h; Maximum Pressure: 78.0mca - Minimum Pressure: 40.0mca.

Brand
Thebe
Applications
Agriculture / Irrigation
Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.
Non fiber solids water
Pumping of wastewater with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Slurry
Pumping of liquid to reservoir or irrigation with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Construction
Use in construction / building in general.
Sewer
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications


• GG-20 cast iron Casing.
• GG-20 cast iron Impeller.
• GG-20 cast iron intermediate.
• O-ring for sealing the Buna Casing N.
• Mechanical seal: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.
• 304 stainless steel Casing.
• 304 stainless steel Impeller.
• O-ring for sealing the Buna N Casing.
• Mechanical seal: Graphite and ceramic faces.

• Spring in 304 stainless steel and elastomer (rubber) in Buna N.


  • Technical Information
  • Options
  • Documentation
  • Drawings
  • Maximum Flow 106,0 m³/h
  • Maximum Pressure 78,0 mca
  • Minimum Flow 15,0 m³/h
  • Minimum Pressure 40,0 mca


  • • Whole pump in Nodular Iron (GGG-40).
    • Whole pump in AISI 304 or AISI 316 stainless steel.
    • Whole pump in bronze.
    • Whole pump in WCB (Carbon Steel).
    • Nodular Iron impeller (GGG-40).
    • Stainless impeller (AISI 304 / AISI 316).
    • Impeller in Bronze.
    • WCB Rotor (Carbon Steel).
    • Special seal of the Mechanical Seal / O'ring Ring through elastomers (rubbers) in Viton or EPDM and "faces" in Silicon or Tungsten Carbide .
    • Gasket sealing.
    • Explosion-proof motor assembly.
    • Bearing assembly x Base x Elastic sleeve.