P-18

Multi-stage Centrifugal Motor - Monoblock - Single-phase or Three-phase II Poles Motor, 60Hz, 3500rpm - Flange nozzles with removable support feet that can be positioned from 90º to 90º to meet the need for suction and discharge positioning according to DIN EN 1092- 2/97 PN 16/40 (comes with flange for BSP thread), Suction 2.1 / 2 "" x Settlement 2 "". Lateral suction (Bare Shaft supported with Bare Shaft) from 2 to 6 stages (Impellers) - 2 mechanical seals (1 in the suction and 1 in the discharge). Used for clean water. Maximum Flow: 44.9m³ / h - Minimum Flow: 7.2m³ / h; Maximum Pressure: 337.1mca - Minimum Pressure: 45.0mca.

Brand
Thebe
Applications
Public water supply
Pressurization of public water distribution networks.
Agriculture / Irrigation
Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.
Boiler
Pressurization for steam production.
Fire Fighting
Pressurization of Hydrants, Showers, Splinkers / Jockey Pump - Keep the network pressurized.
Construction
Use in construction / building in general.
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Washing systems
Nozzle pressurization for washing in general.
Specifications


• GG-25 cast iron suction and discharge Casing.
• GG-25 cast iron suction support.
• GG-20 cast iron intermediate.
• Impellers in cast iron GG-20.
• Intermediate cast iron GG-20.
• Sealing O'ring rings in Buna N.
• Mechanical seals: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.


> >

  • Technical Information
  • Options
  • Documentation
  • Drawings
  • Maximum Flow 44,9 m³/h
  • Maximum Pressure 337,1 mca
  • Minimum Flow 7,2 m³/h
  • Minimum Pressure 45,0 mca


  • • Whole pump in Nodular Iron (GGG-40).
    • Whole pump in AISI 304 or AISI 316 stainless steel.
    • Whole pump in bronze.
    • Whole pump in WCB (Carbon Steel).
    • Nodular Iron impeller (GGG-40).
    • Stainless impeller (AISI 304 / AISI 316).
    • Impeller in Bronze.
    • WCB Rotor (Carbon Steel).
    • Special seal of the Mechanical Seal / O'ring Ring through elastomers (rubbers) in Viton or EPDM and "faces" in Silicon or Tungsten Carbide .
    • Sealing using gaskets.
    • Explosion-proof motor assembly.
    • Bearing assembly x Base x Elastic sleeve.
    • Flange nozzles according to ANSI B16.1 .
    • Munsell red paint for fire fighting.
  • Curves P-19 Download
  • General Manual Download
  • List of Parts - P-18/2 to 4 Packed Gasket - Parts from July 2014 Download
  • List of Parts - P-18/2 to 4 Seal Bare Shaft - Parts from July 2014 Download
  • Parts List - P-18 Motor IP-55 Gasket Download
  • Parts List - P-18 Motor IP-55 Seal Download
  • Parts List - P-18/5 to 6 Packed Gasket - Parts from July 2014 Download
  • Parts List - P-18/5 to 6 Seal Bare Shaft - Parts from July 2014 Download