Submersible Centrifugal Pump - Single-channel impeller, anti-clogging - Automatic float incorporated in single-phase version up to 1.5hp - IP-68 motor in II Poles, 60Hz, 3500rpm - Nozzle with thread BSP 1.1 / 2" ".
Used for water with non-fibrous solids with a maximum diameter of 50mm and a proportion of up to 20% of the volume.
Maximum Flow: 54.0m³ / h - Minimum Flow: 6.0m³ / h;
Maximum Pressure: 20.0mca - Minimum Pressure: 2.0mca.
NOTE: Free of oil in the motor (dry chamber), the cooling is performed by the water by which it is submerged.
Maximum submergence of 10.0m.

Pumping of liquid to reservoir or irrigation with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Use in construction / building in general.
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).

• 304 stainless steel Casing.
• Suction grid in 304 stainless steel.
• Impeller in 304 stainless steel.
• Sealing rings in Buna N.
• Mechanical seal: Faces in graphite and ceramics.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.

  • Technical Information
  • Documentation
  • Maximum Pressure 20,0 mca
  • Minimum Pressure 2,0 mca
  • Maximum Flow 54,0 m³/h
  • Minimum Flow 6,0 m³/h