DSC4


• Discharge connection: 150 ~ 300 mm
• Motor power: 50 ~ 145 hp
• Solid passage: Hydraulic A ~ F: 75 mm / Hydraulic H: 50 mm
• Impeller: Non-clogging, open and closed type
• Shaft seal: Double mechanical seal, Tandem type, oil lubricated
• Type: Submersible, three-phase, dry chamber with cooling jacket
• Protection index: IP-68
• Insulation class: H
• Nominal speed: 1,800 rpm (4 poles) or 1200 rpm (6 poles)
• Stator voltage: 220V, 380V and 440V (others on request)
• Start type: Direct
• Internal protection: Thermal sensor in each phase / Leak detector (optionally thermal sensor for the lower Bare Shaft)
• Electric cable : Length 10 m (others on request)
• Maximum temperature: 40 ºC
• Maximum submergence: 35 m
• Number of starts per hour: 15.
• Flow rate: 120 ~ 1,500 m³ / h
• Manometric height: 7 ~ 72 m

Brand
Ebara
Applications
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications


• Volute: Cast Iron.
• Impeller: Cast Iron.
• Shaft: AISI 420 stainless steel.
• Wear ring: AISI 304 stainless steel.
• motor Casing: Cast iron.
• Nuts and bolts: AISI stainless steel 304.
• Mechanical seals: Upper: ceramic x graphite - Lower: silicon carbide x silicon carbide.
• Bare Shafts: Ball Bare Shafts lubricated with grease.


  • Technical Information
  • Documentation
  • Minimum Pressure 7,0 mca
  • Minimum Flow 120,0 m³/h
  • Maximum Pressure 72,0 mca
  • Maximum Flow 1.500,0 m³/h